OpenBuildings™ Designer Help

To Punch a Hole on Multi Layer Compound Slab

  1. Click Punch Hole on ribbon.

    The Placement tab opens that contains different Punch Hole Options.

  2. Select the Punch Mode type from the drop-down list.
  3. (Optional) Set the Depth by entering the value.
    Note: You need to select Hole Profile in Punch Mode to enable Depth.
  4. Select the placed block.
  5. Select multiple layers by pressing <Ctrl>.
  6. (Optional) To deselect a layer, press <Ctrl> and then select that particular layer.
  7. (Optional) Select the Dynamic Punch Mode and adjust the hole depth as needed.
  8. (Optional) Select the Punch Through Punch Mode to get a hole punched through the selected compound slab layers.
  9. Accept/Reject to get a hole punched through the selected compound slab layers.
  10. (Optional) Hold <Ctrl> and select to add additional punching shapes.
  11. Click Delete Hole Profile to delete the Hole Profile on compound slab.

Left: Punch Mode = Hole Profile, Depth = 1, Right: Punch Mode = Dynamic

Punch Mode = Punch Through

Parent topic: Punch Hole